Ionizing equipment

High-voltage ionizing units are used in electronics production, where precise control of static charges is essential. Ionizers generate an electric field that splits the air molecules near the bar into positive and negative ions. By attracting opposite charges, these ions effectively neutralize the static charge on the products. This ensures that surfaces remain neutral and no unwanted electrostatic discharges occur.

The image shows a black spray gun with a gray handle. It has a metal nozzle at the front and a yellow sticker labeled
ECO GUN Ionizer gun
Connection to compressed air quick coupling
++ no power supply required++

Product No.: 7530.IG
645,50 EUR
excl. 19% tax
The image displays a device for manual use, consisting of a handle with a long cable and a box. The box features a green button and a small display.
AG HP02 ionization gun (BlueLine)
incl. adapter (Controller) and cable/hose 2.1 m
24V DC / 230V 50 Hz

Auto - ion balance +/-10V
ion output monitoring system
status message by 2 LEDs
- integrated air valve electric
- built-in air filter 0.01 ym
- built-in adjustable air volume throttle

Product No.: 7501.AG-HP02
849,00 EUR
excl. 19% tax
The image displays a technical device, likely an air purifier or cooker. It is rectangular with a front made of thin strips for air circulation and features control lights and a rotary dial.
Aerostat XC2 - table-top model ++Simco++
fan switchable in 2 steps, integrated heater,
integrated alarm, ionization display,
emitter cleaning,110-230V / 50/60Hz
[ ISO 14644-1 Class 6 / cleanroom class 1.000 ]
serial no:

Product No.: 7500.XC2
1.056,00 EUR
excl. 19% tax
The image shows a white fan with a large, round grille at the front. It has a rotary knob on the side and a small display below, which may indicate the operational status.
Ionizing blower 5802i CXL - mobile tabletop model
Discharge time max.: 1 - 2 s / Ozone generation max.: 0.008 ppm /
Ionizing blower 5810i CXL +SIMCO+
mobile tabletop model, Steady State DC,
automatic ermitter cleaning system,
base for table mounting, coverage 30x150 cm
incl. power supply unit
Serial No.:

Product No.: 7500.CXL
821,00 EUR
excl. 19% tax
The image shows an elongated, white bar with two black pads at the ends. In the middle, there is a blue area with controls, presumably for operation.
Aerostat Guardian - overhead model ++SIMCO++
Ionizer, 230V / 50 Hz
[ISO 7 / cleanroom class 10000]

Serial no.

Product No.: 7500.G
1.418,00 EUR
excl. 19% tax
The image shows a technical device with a handy grip and a long cable. The grip is gray with a logo, and below it is a controlled unit used for air purification.
ION 6115 - AirForce ionizer gun ++SIMCO/ION++
with 2 m hose, 24V DC / without power supply unit
[ISO 5 / cleanroom class 100]

Product No.: 7500.6115
1.273,00 EUR
excl. 19% tax
The image shows a small, white humidifier with a front ventilation grille. On the front, there is a blue-and-white logo and two control lights.
2 Products
Product No.: 7500.M2
from 584,00 EUR
excl. 19% tax
The image shows a compact air ionizer with a square fan in the center. On the front, there are switches and a rotary knob for adjustments.
AB-21H BlueLine, mobile table-top model
Ionizer, 24V DC / 230V, 50 Hz


Serial no.:

Product No.: 7501.AB-21H
464,00 EUR
excl. 19% tax
The image displays an elongated, white device with three ventilation slots and a control panel. The control panel features buttons and displays for operation.
AB 120H BlueLine overhead model EPAtec
with 3 fans, ionizer, 230V / 50 Hz


serial no

Product No.: 7501.AB-120H
815,00 EUR
excl. 19% tax
It is a blue pen with a white tip. The body has a smooth surface and a practical clip. The pen reads
Test pin TensION ++SIMCO++

Product No.: 7500.TENSION
72,95 EUR
excl. 19% tax
The image shows an ionized air gun in gray with a long handle and a hose connection. It has a mechanical shape and bears the
Ionized air gun 3M type 980 E
Ionization gun, hose/cable length 2.1 m
Dimensions controller: 216 x 76 x 41 mm / WxHxD
230 V / 50 / 60 Hz

Product No.: 3M-980E
1.697,00 EUR
excl. 19% tax
The image shows a rectangular, gray device with a round ventilation grille at the front. On the side, there is a rotary switch. Below, there is a colored sticker with model information.
ION 6422e - mobile ionizer
Discharge time max.: 4 s / Ion balance +/-: 20 V / Ozone generation max.: 0.004 ppm
ION 6422e- mobile ionizer ++SIMCO/ION++
bench-top model, 24V DC or 24V 50-60 Hz
without power supply unit
[ISO 5 / clean room class 100]

Product No.: 7500.6422
583,00 EUR
excl. 19% tax
The image shows an air ionization device that is rectangular and flat. It has a gray casing with a white front and blue frame. Control knobs and switches are located on the front.
AB 40 BlueLine table-top model
Ionizer, 230V / 50 Hz

Product No.: 7501.AB-40
549,00 EUR
excl. 19% tax
The image displays a compact device with a white casing. It features various ports, switches, and an alarm indicator with LED lights. On one side, there is a stainless steel plate for mounting.
AN HP02 ion spray nozzle EPAtec
24V DC / 230 V, 50 Hz with power supply unit
incl. nozzle nosepiece OP-S

Serial no.:

Product No.: 7501.AN-HP02
421,00 EUR
excl. 19% tax
1 to 16 (from a total of 34)