EPA requirements according to DIN EN 61340-5-1
ESD control element | Product qualification a | Compliance verification b | ||
Test procedure | Limits c | Based on testing procedures | Limits c | |
Work surfaces, storage shelves and transport trolleys g | IEC 61340-2-3 | Rgp < 1 x 109 Ω Rp-p < 1 x 109 Ω | IEC 61340-2-3 | Rg < 1 x 109 Ω |
Wrist strap connection point | - | - | - | Rg < 5 x 106 Ω |
Flooring | IEC 61340-4-1 d,e | Rgp < 1 x 109 Ω | IEC 61340-4-1 | Rg < 5 x 109 Ω |
Ionization | IEC 61340-4-7 | Decay (1000 V to 100 V and -1000 V to -100 V) < 20 s Offset voltage < +/- 35 V | IEC 61340-4-7 | Decay (1000 V to 100 V and -1000 V to -100 V) < 20 s Offset voltage < +/- 35 V |
Seating | IEC 61340-2-3 (measurement of resistance to groundable point) | Rgp < 1 x 109 Ω | IEC 61340-4-9 | Rg < 1 x 1011 Ω |
EPA-clothing | IEC 61340-4-9 | Rp-p < 1 x 1011 Ω | IEC 61340-4-9 | Rp-p < 1 x 1011 Ω |
Groundable EPA clothing | IEC 61340-4-9 | Rgp < 1 x 109 Ω | IEC 61340-4-9 | Rgp < 1 x 109 Ω |
Legend to the table
a | For product qualification, the environmental conditions for the test should be (12 ± 3) % relative humidity and (23 ± 2) °C. Unless specified in the referenced IEC standards, the minimum ambient temperature conditioning time for product qualification should be 48 h. |
b | The test methods in the compliance verification column refer only to the basic test method. The test methods are not expected to be fully followed |
c | Symbols used in this table: Rp-p refers to point-to-point resistance, Rg corresponds to resistance to ground and Rgp refers to resistance to groundable point. |
d | The maximum admissible test voltage for the measurement of ESD floor coverings to be used for an ESD program that complies with this standard is 100 V. |
e | If a flooring is used to ground the personnel handling ESDS, reference is made to the system requirements in table 2. |
f | In situations where damage from the Charged Device Model (CDM) must be considered, a lower threshold of the point-to-point resistance Rp-p of 1 x 104 Ω is recommended. |
g | Working surfaces are defined as any surface on which an ESD-sensitive element is placed. |
Workwear | Professional Footwear 2024
DPV main catalog 2023 | 2024