MAESTRO 5L
Adjustment
The distance between the upper and lower circular blades is precisely adjusted via an eccentric. If service is needed, both shafts with mounted circular blades are simply removed.
The width of the PCB feeder can be adjusted precisely. The distance of the upper to the lower circular blade is adjusted with a fine thread on the shaft.
Safe handling
The handling is easy and comfortable. The feeding of the PCB takes place by hand or automatically within the assembly line, or by a loading station located in front of the line.
The separated PCBs are received by a conveyor belt. Dividers and edge strips fall through into the container below.
From the conveyor belt, the PCBs are taken by hand or passed to a following transport unit for further processing.
A light barrier at the end of the transport distance prevents an unintentional falling of the PCBs.
Gentle separation
The PCB is separated with nearly zero potential due to the special sharpening of the circular blades.
The distance of the circular blade is adapted with spacer rings to the PCB width according to customer's requirements.
With an additional conveyor belt for further processing of the individual panels after separation.
Strain of the components
For critical components an upper limit of the tensile stress is often determined. Please ask us for the possibilities to reduce the tensile stress of the components.
PCB:
PCB thickness | 1.0 - 3.2 mm |
1/3 of PCB size, | |
Scoring depth | min. 0.25 mm |
Extension of the external dimensions </FONT> | 0.1-0.2 mm |
The scoring groove can be interrupted by cut-outs.
Programming
Display | - cutting speed - cut length or groove numbers |
Control | - measurement of the cutting length - jam in front of/behind the blades - stop at the end of the conveyor belt |
Interfaces | - external start / stop - SMEMA (round 14-pin) |
Technical data
| Separation principle: | top circular blade, bottom circular blade |
| Separation process: | Motor drive |
| Seperation speed: | 100-220 mm / sec. adjustable in 10 steps |
| Cutting length: | with activated light barrier 100-570 mm |
| with deactivated light barrier > 100 mm | |
| Width off-cut: | min. 3 mm |
| Component height / component side: | max. 30 mm |
| Component height / solder side: | max. 10 mm |
| Number of circular blades: | up to 10 |
| Panel width: | up to 310 mm |
| PCB width: | 10-290 mm |
| Supply voltage: | switchable 115/230 V ~ 50-60 Hz |
| Operating temperature: | 10°C to 35°C |
| Storage / transport temperature: | -20°C to 50°C |
| Humidity non-condensing: | 10% to 85% |
| Weight: | 63 kg |
The devices meet the safety requirements of the EC directives. An EC declaration of conformity is supplied with the devices.
MAESTRO 5L with control light (Note: control light is included in the standard scope of delivery.)
Scope of delivery:
- Maestro 5L with base frame
- Number of circular blades as requested
- Support and holder handles
- Adjustment device for blade change
Scope of delivery:
- Maestro 5L with base frame
- Support and holder handles
- Adjustment device for blade change
The scope of delivery does not include a pair of blade shafts!
Workwear | Professional Footwear 2024
DPV main catalog 2023 | 2024