Main page » Products

ESD Protection

ESD Protection

Electrostatic discharges (ESD) are a constant challenge in the modern electronics industry. These uncontrolled discharges can damage sensitive electronic components and lead to costly failures. To minimize these risks, various ESD protection measures are used, including personnel grounding systems, ESD markings and ionizing devices.

Solder Mask Dots 10 mm

Ø: 10.0 mm / Count: 1,000 piece

Solder mask dots 10 mm diameter, 1,000 pcs / roll
high-temperature resistant polyimide film,
brown transparent, silicone adhesive,.
thickness incl. adhesive approx. 0.055 mm,
heat category - can be used up to 300°C for a short time

++slotted carrier foil++

Product No.: LAP-10.1000

33,15 EUR

Solder Mask Dots 14 mm

Ø: 14.0 mm / Count: 1,000 piece

Solder mask dots 14 mm diameter, 1,000 pcs / roll
high-temperature resistant polyimide film,
brown transparent, silicone adhesive,.
thickness incl. adhesive approx. 0.055 mm,
heat category - can be used up to 300°C for a short time

++slotted carrier foil++

Product No.: LAP-14.1000

38,65 EUR

ESD Flux-Dispenser 60 ml blue

Thread: yes / Size: 16 / Internal Ø: 1.35 mm / Color: purple / ESD

ESD

ESD flux dispenser 16, 60 ml, blue durAstatic
dispensing needle with thread size 16 / purple,
(internal diameter 1.35 mm)
durAstatic permanently dissipative
DIN EN 61340-5-1

Product No.: 2070.35566

14,20 EUR

ESD Flux-Dispenser 60 ml yellow

Thread: yes / Size: 20 / Internal Ø: 0.58 mm / Color: yellow / ESD

ESD

ESD flux dispenser 20, 60 ml, yellow durAstatic
dispensing needle with thread size 20 / yellow,
(internal diameter 0.58 mm)
durAstatic permanently dissipative
DIN EN 61340-5-1

Product No.: 2070.35572

14,20 EUR

VDE series Elektrostatik toom 71

Elektrostatik VDE series volume 71
"Ursachen, Wirkungen, Schutzmaßnahmen, Messungen,
Prüfungen, Normung"
4th updated edition 2017

Product No.: ESD.VDE.B-4

27,10 EUR

Dispenser durAstatic® type 35-253 IPA ESD

ESD

ESD Dispenser durAstatic green 35-253
180 ml , ++ Menda pump One-Touch ++
>>>> imprint: ISOPROPANOL (IPA) <<<<
GHS Label, permanently dissipative
DIN EN 61340-5-1

Product No.: 2070.294.IPA

29,35 EUR

Quick-lift fabric, self-adhesive on both sides, residue-free removal

Color: green / Width [mm]: 800 / Roll length [m]: 25

Quick Lift Fabric DT 100 Drytack++Thomsit++
self-adhesive 0.8 x 25 m = 20 m²

DT100 : For residue-free reuptake bonding of textile, PVC and rubber coverings

Product No.: 1280.DT100

178,80 EUR

Floor mat type 1F fire class B1

Length [mm]: 950 / Width [mm]: 650 / Thickness [mm]: 13 / Color: black / ESD

ESD

ESD anti-fatigue floor mat type 1F
Dimensions: 650 x 950 x 13 mm,
incl. 10 mm snap
Type 1F = flattened knobs
Fire class B1 (DIN EN 61340-5-1)

Product No.: 1306.B1.0650.0950

84,55 EUR

Special adhesive K192 conductive

Large container: 13 kg / ESD

ESD

K192 - Special adhesive conductive, light grey
for conductive PVC and rubber coverings
1 container = 13 kg +Thomsit+
Consumption 280g/m²
Application with toothed spatula

Product No.: 1280.K192

13,30 EUR

KGM:

Antifatigue mat ECOSTAT endpiece

Version: corner piece / Width [mm]: 970 / Length [mm]: 970 / Thickness [mm]: 13 / ESD

ESD

ESD Anti-fatigue floor mat type 2 corner piece
Dimensions: 970 x 970 x 13 mm,
Flat knobs type 2 , longitudinal laying
Fire class = B1 (DIN EN 61340-5-1)

Product No.: 1307.B1.Q970.Q970.VC

123,45 EUR

AeroBar 5225S Ionizing bar 44"/1118 mm

AeroBar 5225S ionizing bar 44"/1118 mm, 24Volt DC
Emitter: silicium, interchangeable
[ ISO 14644 / Class 1 ]

Remote control 7500.AB. R required
**This product is excluded from exchange**

Product No.: 7500.AB.44

1.776,00 EUR

Belt cartridge 3.6 m English

Belt cartridge belt length 3600 mm
belt deployable in different directions
steel case, labeling English
"ESD PROTECTED AREA"

Product No.: 1801.G.K.36.E

137,25 EUR

Top Gun TG3 ionizer gun - 4.2 m cable

TopGun ionization gun ++SIMCO++
230V / 50 Hz (14 ft - 4.2 m cable)
[ISO 6 / cleanroom class 1,000]

Product No.: 7500.TG3.42

1.379,00 EUR

Workstation mat ESD-dry ergolastec type H

Length [mm]: 1303 / Width [mm]: 887 / Thickness [mm]: 16 / Color: black / ESD

ESD

ESD workstation mat ergolastec ESD-dry type H
Tail end type H, dimensions: 1303x887x16 mm,
Flat knobs, material: SBR - color black
Weight approx. 19 kg, dissiaptive
(DIN EN 61340-5-1)
>> tail end type H = 1 short side beveled edges / 2 long sides + 1 short side interlocking system <<
SBR (new rubber composite)

Product No.: 1350.152.H

249,70 EUR

Sign holder DIN A4

Sign holder DIN A4, metal frame
with mounting flange
suitable for belt barrier posts
1801.G.P.Y and 1801.G.P.B

Product No.: 1801.G.P.SA4

77,25 EUR

Dispenser durAstatic™ type 35-277.AC ESD

ESD

ESD dispenser durAstatic yellow type 35-277
180 ml, ++ Menda pump One Touch ++
>>> with imprint: ACETONE <<<
embossed ESD symbol, permanently dissipative
DIN EN 61340-5-1

Product No.: 2070.277.AC

25,35 EUR

545 to 560 (from a total of 1009)