The image shows an electrical device with a yellow top and two prominent push buttons. There are controls for settings and a display for status indicators.
PGT®120.COM with RS232 interface
(Product No.: 7100.PGT120.COM)
The image shows an electrical device with a yellow top and two prominent push buttons. There are controls for settings and a display for status indicators.
Notice

PGT®120.COM with RS232 interface

PGT®120.COM with RS232 interface

dpvlink:
20201
Further product information
 
available available
796,00 EUR

excl. 19% tax

1 PCE
Compare Compare
Notice
Product Info

PGT®120.COM with RS232 interface

The PGT®120.COM personnel testing station with RS232 interface is specifically designed for checking personal grounding resistances in ESD-protected areas. The integration of an RS232 interface allows for easy connection to PCs or terminals for direct display of measurement data in ASCII format. This model features an adjustable door opening time of 1 or 3 seconds and facilitates the further processing of measurement and test results, ideal for use at time recording terminals.
The dimensions of the device are 200 mm in width, 63 mm in height, and 150 mm in length, with a weight of 0.5 kg. It operates within a temperature range of 15 to 40 °C and should be stored in an environment with a humidity of 75 to 85%. The test voltage varies between 30 and 100 V. The recommended calibration interval is based on the test equipment list.
Included in the delivery are the test station itself, shoe electrodes, a factory calibration certificate, an instruction manual, and an AC adapter for 230 V AC. The device is not designed for battery operation and requires an external power supply via the included adapter.
Recommended calibration interval
Recommended calibration interval
according to test equipment list bzw. according to test equipment list
Test voltage
Test voltage
30 - 100 V
Height [mm]
Height
63
Length [mm]
Length
150
Width [mm]
Width
200
Humidity
Humidity
75 - 85 %
Operating temperature
Operating temperature
15 - 40 °C
Storage temperature
Storage temperature
-10 - 60 °C
Weight
Weight
0.5 kg
Show accessories
Accessories

Accessories

The image shows a standing counter with an orange sign "POTENTIAL STATION" at the top. Below that is a control panel, and beneath that a flat area with a thin red line.
PGTest Station for PGT® 120 / PGT® 120.COM...
PG Test station V01 for PGT 120 / PGT 120.COM
with magnetic document pocket IDP-STAT-A3 PVC
!!!! PGT120 test station not included in delivery!
dpvlink
17663

999,00 EUR
The diagram displays a system layout with multiple gates (1, 2, 32) connected via Ethernet. There is a data collector, user, and measurement data management.
Software for "Data Collection", CD-ROM
Software for "Data collection" on CD-ROM
dpvlink
19678

Price on request
The image shows a device with a screen, telephone, and keypad. Below is an area with two red lines. It is encased in a sturdy, yellow frame.
PGTest station for PGT® 120.COM
PGTest station with TouchPC for PGT 120.COM
including temperature and humidity sensor
!!!! PGT120.com not included in delivery!
dpvlink
17663

Price on request
The image shows a rectangular device with a yellow frame and a screen. The display shows information such as temperature, humidity, and a date/time stamp. An RFID symbol is visible.
Data Terminal Controller DT3
Data terminal controller DT3 incl. display, RFID
Reader and relay contact


Interfaces:
x USB
1 x D-SUB9 für PGT120.COM
1 x RJ45 - LAN
1 x RJ12 - Relais
1 x Micro USB - RFID Reader
1 x Micro USB - POWER 5VDC
dpvlink
22373

Price on request
Image
Calibration for personnel grounding tester...
Calibration for PGT 120 (with certificate)
Device must be sent in for calibration.
dpvlink
26315

87,00 EUR
The image displays a calibration certificate. It includes information on accreditation, test data, and the calibration date. The phrase "DAkkS Calibration" is highlighted in green.
DAkkS/DKD Calibration for PGT 120
DAkkS/DKD calibration pour PGT 120
(with certificate)
dpvlink
26315

Price on request
The image displays a rectangular frame with a yellow border and a dark interior. In the center, there are two small cutouts that resemble the shape of a cup or a container.
Test station mat for PG test station
Test station mat for PGTest Station V01 / V18
with yellow leading edge incl. compensation plate
dpvlink
17663

243,00 EUR
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Catalogues

Page: 195
Complete Catalog 2023 - 2024

Product Family

Article image
Article description
Recommended calibration interval
Test voltage
Height [mm]
Length [mm]
Width [mm]
Humidity
Operating temperature
Storage temperature
Weight
Price
Compare
7100.PGT120.COM - PGT®120.COM with RS232 interface
7100.PGT120.COM
PGT®120.COM with RS232 interface
according to test equipment list bzw. according to test equipment list
30 - 100 V
63
150
200
75 - 85 %
15 - 40 °C
-10 - 60 °C
0.5 kg
796,00 EUR
Show Compare List (0)

This product is compatible with (for example):

The image displays a calibrated device with a black casing. On the front, there is a yellow label featuring various scale markings and a rotary knob in the center.
Calibration unit for PGT 120 with 8 Dip switches...
PGT 120 calibration unit
contains resistances with the thresholds
for the testing of PGT 120
with 8 Dip switches
incl. calibration certificate
Serial no.:
dpvlink
10133

111,15 EUR
The image shows a USB relay. It has a rectangular, white shape with two buttons and two small LEDs. A transparent USB cable connects it to a computer.
Door opener switching relay for data terminals...
Door opener switching relay for data terminals
DT2, DT2.1, TC18
dpvlink
21688

Price on request
The image shows an electrical testing device with two rectangular buttons, a display on the right side, and symbols for various functions. The color is primarily yellow and black.
Holder extension for Data Terminal 3
Holder extension for Data Terminal 3
dpvlink
21688

53,65 EUR
The image shows a metallic wedge that is flat on one side and rises to a sharp angle at the top. It has a smooth surface and an opening at the base.
Wall bracket for Data Terminal Controller...
Wall bracket for Data Terminal Controller DT3
dpvlink
21688

Price on request
The image shows a touchscreen monitor displaying instructions for conducting a test. On the screen, outlines of feet and a hand are depicted.
Touch Screen Monitor TC18 incl. DATA Terminal...
Touch screen monitor TC18 incl. DATA terminal for
PGT120.com, 10-inch capacitive, with integrated
MiniPC (DATA Terminal), LAN connection RJ45,.
4 x USB2. 0, 1 x COM RS232
Scope of delivery:
1 x touch-PC
1 x EU connection cable
1 x power supply unit
4 x fixing brackets
1 x quick start guide
dpvlink
22379

Price on request
The image shows a black label printer mounted on a stand. It has a roll of labeled adhesive labels, which are partially visible and protruding horizontally.
Labels 36 x 67 mm
Seiko labels 36x67 mm
STAMP2 (2 rolls at 310 pieces)


!!! suitable for PGT 100 Data Terminal label printer !!!
dpvlink
21703

Price on request
The image shows a black label printer mounted on a stand. It has a roll of labeled adhesive labels, which are partially visible and protruding horizontally.
Printer for Data Terminal
Seiko label printer for data terminal
incl. power supply and 2 rolls with 310 labels
(36 x 67 mm)
dpvlink
21703

Price on request
The image shows five white, rectangular plastic cards stacked on top of each other. Each card has numbers and letters embossed on one side. The background is gray.
Transponder ID card
Transporndd ID carte for USB card reader V03
PU = 10 pieces
dpvlink
21700

Price on request
The image shows a black USB hub with an attached USB cable. It has two USB ports on the front and a simple, rectangular design.
4-Port USB Hub
4-port USB hub
dpvlink
21688

8,50 EUR
The image shows a round knob with a glass surface and grooved design. The bottom is black, and a USB cable leads from it. The knob is likely used for volume control.
Signal light with acoustic signal
Signal light with buzzer
(red/yellow/green)
dpvlink
21688

Price on request
The image shows a yellow, upright column with a display on top. Below it is a square platform with round and oval imprints. The entire area is in yellow and black.
Accessory kit for PGT 120
Accessory set for PGT 120, including:
support, wall bracket, bracket for PGT 120
attachable, floor mat with yellow leading edge

Set consisting of:
1801.G.P.Term - pedestal P5-C-1
7100.PGT120.WK.H - holder for PGT 120
7100.PGT120.WK - wall bracket
7100.PGT120.SM.Term - floor mat
dpvlink
19689

389,00 EUR
The image displays a black, rectangular device with a yellow front. It features a rotary knob in the center and several status indicators in the form of symbols and text, displaying calibration values.
Calibration unit for PGT 120 with 12 dip...
Calibration unit for PGT 120
contains resistances with the limits
for the review of the PGT 120
with 12 dip switches
incl. calibration certificate
Serial No.:
dpvlink
10133

94,70 EUR
The image shows a black shelf with a back panel. It has a rectangular base and an opening in the board. The construction is sturdy and practical for wall mounting.
Holder for PGT 120, attachable
Bracket for PGT120, attachable to
base (art. 1801.G.P.TERM)
dpvlink
19689

64,40 EUR
The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Wall bracket for PGT 100 / PGT 120
Wall bracket for PGT 100 / PGT 120
dpvlink
22383

43,90 EUR
The image displays a brown, square product on a yellow base. On it are two smaller, flesh-colored, oval pieces, likely intended for medical purposes.
Floor mat with yellow bevelled edge
Floor mat with yellow leading edge (optional)
dimensions: 950x700x13 mm, for base PGT120
(delivery without footwear electrode)

(suitable for base 1801.G.P.TERM + footwear electrode PGT 120)
dpvlink
19689

158,65 EUR
The image shows a tall, slender post in bright yellow with a round black base. At the top, it has an opening, which might be intended for a barrier tape.
Pedestal stand
Stand for PGT120 (without bracket)
tube yellow / base black
Base diameter 350 mm, 12.5 kg
dpvlink
19689

148,40 EUR
The image displays a rectangular frame with a black, textured inner field and a yellow border. The frame features a central, open field.
Mat
Test station mat with yellow beveled edge
Dimensions: 830 x 680 x 13 mm
(suitable for base plate PGT 120)
dpvlink
22383

170,20 EUR
The image shows an RFID reader with a black casing and a yellow marking. A cable with a USB connection leads away from it. The reader is used for wireless data transmission.
External card reader (USB)
External card reader (USB)
for data terminals DT2,DT2.1,TC18
dpvlink
21700

Price on request

This product is similar to:

The image shows a round knob with a glass surface and grooved design. The bottom is black, and a USB cable leads from it. The knob is likely used for volume control.
Signal light with acoustic signal
Signal light with buzzer
(red/yellow/green)
dpvlink
21688

Price on request
The image shows five white, rectangular plastic cards stacked on top of each other. Each card has numbers and letters embossed on one side. The background is gray.
Transponder ID card
Transporndd ID carte for USB card reader V03
PU = 10 pieces
dpvlink
21700

Price on request
The image shows a black shelf with a back panel. It has a rectangular base and an opening in the board. The construction is sturdy and practical for wall mounting.
Holder for PGT 120, attachable
Bracket for PGT120, attachable to
base (art. 1801.G.P.TERM)
dpvlink
19689

64,40 EUR
The image shows a black label printer mounted on a stand. It has a roll of labeled adhesive labels, which are partially visible and protruding horizontally.
Printer for Data Terminal
Seiko label printer for data terminal
incl. power supply and 2 rolls with 310 labels
(36 x 67 mm)
dpvlink
21703

Price on request

Customers who bought this product also bought the following products:

The image shows a rectangular, diagonally cut piece of metal that is solid on one side. It has a smooth surface and a diagonally running edge.
Wall bracket for PGT 100 / PGT 120
Wall bracket for PGT 100 / PGT 120
dpvlink
22383

43,90 EUR
The image displays a piece of light gray flooring with small, dark spots. One corner is slightly bent, revealing the texture of the material.
Ecostat PR - 2.0 PVC - flooring rolls
Ecostat PR - 2.0 PVC - flooring
Rolls 2.0 m x 9 m = 18 m²
Color: medium grey, thickness: 2 mm
(DIN EN 61340-5-1)
dpvlink
24970

51,45 EUR
The image shows a yellow device on a wall. It features a warning symbol and is connected to a green cable. Below it, a copper strip runs along the ground.
Grounding connection set for floor coverings...
Grounding connection set for floor coverings
with test point / 4 mm socket, cable length
approx. 3m (wall mounting)
dpvlink
8024

20,10 EUR
The image shows a swivel stool with a round, padded seat in black. The seat height is adjustable, and the stool has five casters and a sturdy, chrome-plated base.
ESD swivel stool 1300
ESD swivel stool 1300, release ring "EPAchair"
Polished base, seat height 430-560 mm;
with soft braked ESD castors for hard floors

Fabric Dralon 100-ESD black
Fabric Dralon 220-ESD blue
synthetic leather 330-ESD black

electrostatically dissipative (DIN EN 61340-5-1)
robust and reliable Made in Germany
dpvlink
20751

210,00 EUR