The image shows a device called "WS Aware" with a gray casing and several lights and buttons. Two black modules with sockets are placed next to it. It is used for monitoring electrostatic safety.
WS Aware Workstation monitor Standard Remotes
(Product No.: 770067)
The image shows a device called "WS Aware" with a gray casing and several lights and buttons. Two black modules with sockets are placed next to it. It is used for monitoring electrostatic safety.
Notice / Inquire

WS Aware Workstation monitor Standard Remotes

WS Aware Workstation monitor Standard Remotes

dpvlink:
14088
Properties:
Further product information
 
Delivery time! Delivery time!
916,00 EUR

excl. 19% tax

1 PCE
Compare Compare
Notice / Inquire
Product Info

WS Aware Workstation monitor Standard Remotes

The WS Aware Workplace Monitor Standard Remotes from SCS provides a comprehensive monitoring solution for workplace safety in ESD protection zones. This device is specifically designed to continuously monitor the proper grounding of two workplaces. It checks the grounding connections of users, tools, and workplace surfaces and detects EMI events at the grounding terminals. Monitoring is conducted according to the standards ANSI 6.1 and ANSI/ESDA S20.20, ensuring high reliability in compliance with safety standards.
The monitor is equipped with a Digital Signal Processor (DSP) and allows for event logging via a Facility Monitoring System (FMS) or an optional digital MODBUS interface for networking over an Ethernet network. The impedance of two low-resistance (e.g., tools) and two high-resistance (e.g., table mats) grounding connections is continuously monitored. Additionally, the device offers a "Big Brother" feature, which detects the presence of a person at the workplace using a photo sensor and triggers an alarm if proper grounding is not established.
Alarm thresholds for monitoring are adjustable, and exceedances are indicated by colored LEDs (green for OK, red for alarm, and yellow flashing for EMI voltage). An acoustic alarm is also available and can be disabled if necessary. The technical specifications include dimensions of 81 mm x 32 mm x 57 mm, a weight of 140 g, and an operating temperature range of -37 to 63 °C. The recommended calibration interval is 12 months. The monitor comes with two remote terminals (CTA242) that enable effective monitoring of wristbands (Operator and Visitor).
Recommended calibration interval
Recommended calibration interval
12 months bzw. according to test equipment list
Voltage
Voltage
100 - 240 V
Height
Height
32 mm
Length
Length
57 mm
Width
Width
81 mm
Operating temperature
Operating temperature
-37 - 63 °C
Weight
Weight
140 g
Pictograms
ESD protective
Electrostatic Discharge - marking for materials intended to protect other components from ESD by avoiding potential differences.

Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Product Family

Workstation monitor WS Aware

WS Aware workstation monitor allows the permanent monitoring of two workstations. The measuring device equipped with a DSP (digital signal processor) monitors the flawless ground connection of users, tools and working surfaces. Furthermore, EMI events are registered and displayed. WS Aware monitors detect all grounding parameters of the working environment in accordance with the requirements of ANSI 6.1 and ANSI/ESDA S. 20. 20.

The WS Aware workplace monitor is available in two versions: with 2x Remote Terminal Standard CTA242 or with 2x Big Brother Remote Terminal CTA243

  • Permanent monitoring and logging of all detected events via a current data output by a Facility Monitoring System (FMS) or optionally via a digital MODBUS interface, for networking via Ethernet network
  • Monitoring of the impedance of two low-impedance (e.g. for tools, soldering irons, machines) and two high-impedance (e.g. table mats) grounding connections
  • Monitoring of EMI voltages occurring at the low-impedance grounding connections
  • Adjustable alarm limit values
  • visual indication of exceeding the set limit values by LEDs (OK green, alarm red, EMI voltage flashing yellow)
  • Additional acoustic alarm function (can be switched off)
  • Deactivation of unused inputs via DIP switch (corresponding indication by dark LED)
  • Two remote terminals for monitoring two double-wire wrist straps each (operator and visitor)
  • Permanent measurement of leakage resistance and body voltage
  • Terminals with Big Brother function: detection of a person at the workstation using a photo sensor and alarm triggering via the remote terminal in the absence of grounding

Properties:

  • "Big Brother" monitoring function detects users who are not correctly grounded
  • Extremely low voltage (25mV CA) for permanent monitoring of voltage and resistance of the twin conductor wrist straps 
  • Monitoring of grounding parameters according to ANSI 6.1 and ANSI/ESD S20.20
  • EMI monitoring of ground connections
  • RJ45 port for data transfer to the computer

   

Wrist monitor

Ground connection:1 MOhm per wrist strap connector
Wrist connections:2 x Remote Terminals (1 Operator, 1 visitor)
Test voltage to the body0.025 V (25 mV)
Body bleeder resistance alarm level:10 MOhm default*.
Body voltage alarm level:+/-2.5 V default*.


 

Ground monitor

Hard ground terminal (tools, machine):2 connections
Dissipative surfaces:2 connections
Alarm for hard grounding*:10 Ohm default
Alarm for dissipative grounding*:1 GOhm default


 

Imposed voltage

Hard connection:< 0.075 V open circuit
Dissipative surfaces:< 0.4 V open circuit
Power consumption:< 150 mA
Dimensions:81 mm x 57 mm x 33 mm
Weight (approx.):120 g

* These parameters are either locally settable in the control panel or through a plant monitoring system. Default values are used if there is no other specification.

Article image
Article description
Recommended calibration interval
Voltage
Height
Length
Width
Operating temperature
Weight
Price
Compare
770067 - WS Aware Workstation monitor Standard Remotes
770067
WS Aware Workstation monitor Standard Remotes
12 months bzw. according to test equipment list
100 - 240 V
32 mm
57 mm
81 mm
-37 - 63 °C
140 g
916,00 EUR
770068 - WS Aware Workstation monitor Big Brother
770068
WS Aware Workstation monitor Big Brother
12 months bzw. according to test equipment list
100 - 240 V
32 mm
57 mm
81 mm
-37 - 63 °C
140 g
987,00 EUR
Show Compare List (0)