Placement tweezers SM115.SA
The SM115.SA assembly tweezers from ideal-tek are specifically designed for the precise holding and positioning of cylindrical components with a diameter of 0.6 to 1.2 mm. These high-quality tweezers are made of stainless steel and feature a sandblasted, acid-resistant surface that ensures durability and robustness.The tip of the tweezers is bent at 25° and offers a smooth gripping surface that allows for secure handling without damaging the components. With a total length of 120 mm and a tip width of only 0.85 mm, this tool enables extraordinarily precise manipulation.
The weight of 14.5 g and the smooth grip surface provide comfortable and fatigue-free use even during prolonged use. The tweezers are not ESD safe, which should be considered when used in corresponding environments. Ideal for use in electronics manufacturing and other technical areas where precise handling of small components is required.
Details
- Tweezer type Tweezer type
- placement tweezers
- Tip form Tip form
- bent
- Degree of bending Degree of bending
- 25 °
- Gripping surface Gripping surface
- smooth
- Handle surface Handle surface
- smooth
- Tip type characteristics Tip type characteristics
- cylindrical/beveled
- Height Height
- 11.5 mm
- Length Length
- 120 mm
- Ø component Ø component
- 0.6 - 1.2 mm
- Thickness/diameter Thickness/diameter
- 0.5 mm
- Tip width Tip width
- 0.85 mm
- Width Width
- 12 mm
- B [mm] B [mm]
- 8 mm
- Material Material
- stainless steel
- Surface Surface
- sandblastered / acid-resistant
- ESD ESD
- no
- Weight Weight
- 14.5 g
SMD tweezers facilitate a simple handling of very small SMD components. Different tip shapes and angles are available for various component types and applications. The glare-free satined surface and the ergonomic design allow a comfortable work.
Special versions are available on request. The models can also be delivered as reverse-action tweezers.
| Code | Material | Properties |
SA | Stainless steel | · largely stainless · non-magnetizable (80%) · resistant against most acids and vapors · medium hardness |
As a Swiss manufacturer ideal-tek is specialized in the production of high-quality precision tweezers and pliers in the highest quality segment.
The tools of ideal-tek impress by an exceptional precision and fineness. Specifically satined surfaces provide a glare-free and comfortable working. Only high-quality raw materials are used.
ideal-tek has more than 30 years of experience in the application of high-tech plastics and ceramics.
ESD safety and mechanical sensitivity of the parts as well as a user-friendly handling and ergonomic finishing are ensured by a wide range of material variations, surface coatings and different designs.
Consequentially, this enormous selection allows you to find the most optimal solution for your requirements.
Material descriptions and properties
| Code | Material | Properties |
C | Carbon steel | · very long service life · very sturdy · optimum hardness · resistant · highly magnetic · sensitive to corrosion (Protection only by nickel plating) |
S | Tool steel, hardened | · stainless · fine tips available · good hardness values · magnetizable |
SA | Stainless steel | · largely stainless · non-magnetizable (80%) · resistant against most acids and vapors · medium hardness |
BR | Copper zinc alloy (brass) | · antimagnetic · largely resistant to corrosion by water and vapor · very good cold formability · suitable for sensitive mechanical parts |
CF | conductive carbon fiber reinforced Carbofib (PA) | · ESD safe, conductive · chemical resistance · gentle on surfaces · strong and durable · surface resistance 10² ohm · temperature-resistant up to 190°C · continuous use temperature 130°C |
CP | conductive carbon fiber reinforced PEEK | · ESD safe, dissipative · very hard and stiff · high resistance against aggressive chemicals · surface resistance 105 - 106 ohm · temperature-resistant up to 300°C · continuous use temperature up to 260°C |
| Note: All-steel tweezers are 100% conductive. In certain circumstances they can be used in ESD areas. The decision about an application in ESD areas is up to the user. | ||
MZ | Zirconia ceramic and aluminium | · no electromagnetic induction at high frequency · no eddy current losses · 100% electrically insulating · 100% antimagnetic · 100% antistatic · 100% stainless · extremely wear-resistant · temperature-resistant up to 700°C · extremely low thermal conductivity · resistant to acids and alkalis (except hydrofluoric acid) · extremely smooth anti-adhesive surface · tips can break in case of misuse |
| Note: The following coatings can be applied to all suitable tweezers. Prices on request. | ||
DN | PVC foam | · very soft and elastic |
DR | Nitrile | · very soft and elastic · high chemical resistance · ESD safe, dissipative · In compliance with ESD standard DIN EN 61340-5-1  |
ESD | ESD Polyester epoxy (black) | · ESD safe · temperature-resistant up to 150°C · In compliance with ESD standard DIN EN 61340-5-1 |
Downloads
- Please log in to download datasheets! :
- There are several datasheets for this product. Please log in!
Catalogues
Product Family
Workwear | Professional Footwear 2024
DPV main catalog 2023 | 2024