The image shows a hand tool with a long, pointed end and a non-slip, black handle. The handle has a grooved surface for better grip. It appears to be a soldering iron or similar.
The image displays a technical drawing of a tool with a narrow, tapered edge. Dimensions are provided: 13.8 mm, 7.8 mm, a radius of 0.05 mm, and an angle of 30°.
The image shows a tool with a long, narrow, pointed end and a round handle. The handle has horizontal grooves for a non-slip grip. It is commonly used for cutting or prying.
Preview: The image shows a hand tool with a long, pointed end and a non-slip, black handle. The handle has a grooved surface for better grip. It appears to be a soldering iron or similar.
Preview: The image displays a technical drawing of a tool with a narrow, tapered edge. Dimensions are provided: 13.8 mm, 7.8 mm, a radius of 0.05 mm, and an angle of 30°.
Preview: The image shows a tool with a long, narrow, pointed end and a round handle. The handle has horizontal grooves for a non-slip grip. It is commonly used for cutting or prying.
Soldering tip needle tip bent RTPS 001 C X MS
(Product No.: 501.107.99)
The image shows a hand tool with a long, pointed end and a non-slip, black handle. The handle has a grooved surface for better grip. It appears to be a soldering iron or similar.
The image displays a technical drawing of a tool with a narrow, tapered edge. Dimensions are provided: 13.8 mm, 7.8 mm, a radius of 0.05 mm, and an angle of 30°.
The image shows a tool with a long, narrow, pointed end and a round handle. The handle has horizontal grooves for a non-slip grip. It is commonly used for cutting or prying.
Mobile Preview: The image shows a hand tool with a long, pointed end and a non-slip, black handle. The handle has a grooved surface for better grip. It appears to be a soldering iron or similar.
Mobile Preview: The image displays a technical drawing of a tool with a narrow, tapered edge. Dimensions are provided: 13.8 mm, 7.8 mm, a radius of 0.05 mm, and an angle of 30°.
Mobile Preview: The image shows a tool with a long, narrow, pointed end and a round handle. The handle has horizontal grooves for a non-slip grip. It is commonly used for cutting or prying.
Notice

Soldering tip needle tip bent RTPS 001 C X MS

Soldering tip needle tip bent RTPS 001 C X MS

dpvlink:
26941
Further product information
 
at short notice at short notice
38,30 EUR

excl. 19% tax

1 PCE
Compare Compare
Notice
Product Info

Soldering tip needle tip bent RTPS 001 C X MS

The soldering tip RTPS 001 C X MS from Weller is a highly specialized component specifically developed for use in MIL-SPEC-compliant applications. This needle tip is bent and has a diameter of only 0.1 mm, enabling precise soldering tasks. With a length of 20.6 mm, it offers an optimal balance between flexibility and stability.
The soldering tip is part of the RTPS series and is exclusively compatible with the WXMPS soldering iron from Weller. Its construction meets the strict MIL-STD-2000 standards and includes additional insulation against ground to prevent interference frequencies. This makes it ideal for sensitive soldering projects where precision and reliability are required.
Please note that this soldering tip cannot be used with conventional handpieces and is specifically intended for use with the WXMPS MS and WXsmart soldering irons.
Length
Length
20.6 mm
Ø
Ø
0.1 mm
Soldering tip series
Soldering tip series
RTPS
Soldering tip shape
Soldering tip shape
needle tip , bent
suitable soldering iron
suitable soldering iron
WXMPS
Documents

Downloads

Please log in to download datasheets! : 
There are several datasheets for this product. Please log in!

Product Family

RTPS Needle tip MS bent

Article image
Article description
Length
Ø
Soldering tip series
Soldering tip shape
suitable soldering iron
Price
Compare
501.107.99 - Soldering tip needle tip bent RTPS 001 C X MS
501.107.99
Soldering tip needle tip bent RTPS 001 C X MS
20.6 mm
0.1 mm
RTPS
needle tip , bent
WXMPS
38,30 EUR
501.108.99 - Soldering tip needle tip bent RTPS 002 C X MS
501.108.99
Soldering tip needle tip bent RTPS 002 C X MS
20.6 mm
0.2 mm
RTPS
needle tip , bent
WXMPS
38,30 EUR
Show Compare List (0)

This product is compatible with (for example):

The image shows a sturdy, black holder with an adjustable metal clamp mounted on a base. It bears the brand "Weller" and is intended for precision work.
SD 1000 solder dispenser
Solder dispenser SD-1000
dpvlink
7479

61,25 EUR
The image shows a wiry cleaning brush with a long, sturdy handle. The bristles are made of fine metal threads and are ideal for scrubbing surfaces.
HAKKO small cleaning brush with handle
HAKKO Small cleaning brush for FT 700
with handle
dpvlink
24147

Price on request
Image
HAKKO cleaning brushes for FT 700
HAKKO cleaning brushes for FT 700
(PU = 2 pieces)
dpvlink
24147

Price on request
The image shows a small, conical funnel made of black plastic. The upper part is wider and the opening has a bowl-shaped structure. The lower part has spiral grooves.
HAKKO receptable A
HAKKO receptable A
for HAKKO solder tip cleaner FT 710
suitable for HAKKO soldering tips type T12/T15/T11
(not suitable for soldering tips
format JL02/tunner/quad/spatula)
dpvlink
24147

Price on request
The image shows a black screw with a conical head. The head has a recessed shape, while the lower part is threaded for screwing into materials.
HAKKO receptable B
HAKKO receptable B
for HAKKO solder tip cleaner FT 710
suitable for HAKKO soldering tips type T14/T18/
900M
dpvlink
24147

Price on request
Image
HAKKO receptable C
HAKKO receptable C
for HAKKO solder tip cleaner FT 710
suitable for HAKKO soldering tips type T10/T13/
T17/T20
dpvlink
24147

Price on request
The image shows a deep blue machine with yellow elements used for cleaning shoes. On the side, there is a brush, and next to it lies a can of care product.
HAKKO Soldering tip polisher FT 700
HAKKO Soldering tip polisher FT 700
with 2 rotating bronze brushes

scope of delivery:
•FT-700 soldering tip polsiher
•B 3052 2 bronze brushes
•FS 100 paste 10g
•B 3051 cleaning brush with handle
dpvlink
24140

Price on request
The image displays an electric tip cleaner. It features a rounded black base, a transparent lid, and a circular opening with a yellow border. The brand "HAKKO FT-710" is visible.
HAKKO Soldering tip cleaner FT 710-05
HAKKO Soldering tip cleaner FT 710-05
with rotating brush rollers B (plastic)

Delivery:
•FT-710 Hakko Soldering tip cleaner
•connection cable
•A 1567 brush rollers 2 pcs
•B 3517 soldering iron holder A
•B 3518 soldering iron holder B
•B 3523 locking nut
•measuring template
dpvlink
24143

Price on request
The image shows a sturdy holder made of black metal. It has a rectangular base, a vertical stand, and a horizontal arm designed for holding devices.
Solder tin dispenser ESD DS-2500
Solder tin dispenser ESD DS-2500 with tool holder
dimensions.: 190 x 150 x 155 mm, weight 1 kg
dpvlink
17637

30,90 EUR
The image shows a sturdy, rectangular stand made of black metal. It features two vertical tubes that taper upwards, along with various mounts on the top.
Solder tin dispenser ESD DS-25002B for 2...
Solder tin dispenser ESD DS-2500B for 2 reels
dimensions.: 190 x 150 x 300 mm, weight 1.4 kg
dpvlink
17637

54,10 EUR
The image shows a black metal bracket. It has a triangular shape with several holes and an adjustable pin to attach various devices.
Solder tin reel holder ESD for second reel...
Solder tin holder ESD DS-2500AB
(Additional holder for second solder wire reel)
dpvlink
17637

24,75 EUR
The image shows a tool station for winding wires. It consists of a sturdy base, a spool with silver wire, and a stand that holds two markers and a pair of pliers.
Solder tin dispenser ESD DS-2500-K incl....
Solder tin dispenser ESD DS-2500-K incl. tools
Diagonal cutting pliers TRE 03 NB
Flat-nosed pliers PN2005
desoldering pump PD03
Tweezers 0SA
Phillips Screwdriver PG2-1
dimensions: 190 x 150 x 255 mm, weight 1.4 kg
dpvlink
17637

63,00 EUR
The image shows a temperature measuring device in a light blue casing. It has a large display showing the temperature at 23.5 °C, below which there are two buttons and a small probe.
Temperature measuring device WCU
ESD temperature measuring device WCU
Battery operation, digital display,
Temperature unit °C and °F
dpvlink
26514

381,90 EUR
The image shows a black holder with three tiered levels. On each level, there are several round, slightly raised depressions in turquoise. The inscription "Weller" is in white on the front.
Soldering tip holder WCTH
ESD Soldering tip holder WCTH
suitable for up to 16 active Weller RT
soldering tips
dpvlink
26512

18,95 EUR
The image displays a three-pronged metal clip. In the center, there is a coiled wire from which two wires with colored plastic handles (green and white) extend. At the top, there is a loop.
Sensors WCU for temperature measuring device...
Sensor WCU temperature meter WCU
PU = 10 pieces
Diameter 0.12 to 0.80 mm
dpvlink
26514

29,65 EUR
The image displays an electronic soldering iron stand. It is predominantly black with blue accents. On the front, there is a slot for the soldering iron and two buttons on the top.
Weller Soldering tip cleaner WATC 100F
Automatic Tip Cleaner WATC100F, 240 V
with fiber brushes, antistatic housing
Universal, fast cleaning of soldering tips and
Tweezers
dpvlink
28144

382,85 EUR
The image displays an electronic soldering iron stand. It is predominantly black with blue accents. On the front, there is a slot for the soldering iron and two buttons on the top.
Weller Soldering tip cleaner WATC 100M
Automatic tip cleaner WATC100M, 240 V
with metal brushes, antistatic housing
Universal, fast cleaning of soldering tips and
tweezers
dpvlink
28144

382,85 EUR
The image shows two round hair brushes with many short, wood-like bristles. The brushes have a black handle and are symmetrically arranged. They appear sturdy and are intended for hair styling.
Fiber brushes WATCBF
Fiber brushes WATCBF
for tip cleaners WATC100M/WATC100F
PU = 2 pieces
dpvlink
28147

86,15 EUR
The image shows a small, silver wire brush attachment with a flat, rectangular end and a dense, bristle-like surface. The attachment is slightly spiral-shaped.
HAKKO cleaning brushes B
HAKKO Cleaning brushes B
for HAKKO solder tip cleaner FT 710
metal bristles
(PU = 2 pieces)
dpvlink
24147

Price on request
The image shows a tool with a rotating wire brush head and a short, cylindrical handle. The brush head is arranged in a spiral shape and is used for cleaning.
HAKKO cleaning brushes A
HAKKO Cleaning brushes A
for HAKKO solder tip cleaner FT 710
plastic bristles
(PU = 2 pieces)
dpvlink
24147

Price on request
The image shows a black, conical adapter. It has a thread at one end and a pointed opening at the tip. It appears solid and is made of plastic.
Replacement tip for desoldering pump 6103A...
Replacement tip conductive made of carbon fiber
(for desoldering pump 6103)
dpvlink
21606

3,60 EUR
The image shows a small, round tin with a screw-on lid. On the surface, the name "Weller" and information about the contents, described as an activator for soldering irons, are displayed.
Tip activator
Soldering tip activator lead-free
dpvlink
7484

9,95 EUR
The image shows a gray, compact structure made up of many thin, spiral-shaped metal threads. It has an irregular, somewhat organized shape and looks like a small, metallic ball.
WDC cleaning wool stainless steel
Spiral wool for WDC replacement (2 pcs)
dpvlink
30244

7,35 EUR
The image shows a gray, compact structure made up of many thin, spiral-shaped metal threads. It has an irregular, somewhat organized shape and looks like a small, metallic ball.
WDC 2 cleaning wool steel
Spiral wool for WDC 2 replacement (2 pcs)
dpvlink
30244

7,75 EUR
The image shows a brush with a long wooden handle. The bristles are gray and soft. The handle features the inscription "Weller". The brush appears sturdy and handy.
Stainless steel brush (3 pieces)
Stainless steel wire brush
(3) packed
dpvlink
13823

15,80 EUR
The image shows a gold-colored, spiral-shaped object made of thin wires. It has an irregular, foamy shape and looks somewhat like a curly ball.
WDC 2 cleaning wool brass
Spiral wool for WDC 2 replacement
brass-plated
PU = 2 pcs
dpvlink
30244

6,05 EUR
The image shows a small, black pipe cleaner with a golden sponge on top. It has a semi-circular shape and a small shelf. The sponge is soft and textured.
WDC - Dry Cleaner
WDC Weller - Dry cleaner
dpvlink
7481

28,70 EUR
The image shows a black, slanted block with a round opening. Inside, there is a silver metal grid. It could be a cleaning brush.
WDC 2 - Dry Cleaner
WDC Weller - Dry cleaner
for WDH safety rests
dpvlink
15047

19,45 EUR
The picture shows a cleaning kit: a black box with golden contents, a green tube, a gray sponge, and a wooden brush with metal bristles. All parts are arranged on a white background.
WDC Cleaning set complete
WDC - cleaning set consisting of:
WCD dry cleaner, WPB1 grindstone, tip activator,
stainless steel brush
dpvlink
13768

56,45 EUR
The image shows four tools: a black soldering station with a golden spiral, a round can with green contents, a gray grinding stone, and a wooden brush with metal bristles.
WDC 2 Cleaning set complete
WDC 2 - cleaning set consisting of:
WCD dry cleaner, tip activator,
stainless steel brush
dpvlink
13768

48,80 EUR
The image shows a round, metal tin with a screwable lid. The tin is partially open and contains gray, fine material. The lid reads "Timber".
FELDER tinner
FELDER tInner, ++lead-free++ approx. 15 g can
Flux DIN EN 29454, 1.2.3.B
(with adhesive pad on the bottom)
dpvlink
17086

6,45 EUR
The image displays a round, silver metal part with a narrow, black rubber tip. It features a textured upper edge and a conical shape pointing downwards.
Desoldering tip for desoldering pump PS 200A...
Weller PS2001A replacement tip antistatic
51321599
for manual desoldering iron Midi PS200A
dpvlink
13838

4,90 EUR
The image displays a blue soldering iron with a narrow, black tip. The casing reads "Weller PS 200". The iron features a textured surface and a button.
PS 200A hand soldering pump
PS 200 A manual desoldering pump, metal housing
Length 200 mm, ESD antistatic
strong vacuum, minimal rebound
dpvlink
13838

77,55 EUR
The image shows a silver soldering iron. It has a thin, straight handle and a black soldering tip. A model designation is printed on the handle.
SA21A hand soldering pump
SA 21A manual desoldering pump, metal housing
Length 200 mm, ESD compliant
dpvlink
13838

26,35 EUR
The image shows a small metal spout with a round, flat top and a thin tube pointing downwards. The spout has a black rubber seal.
Desoldering tip for desoldering pump SA 21A...
SA 21A1 desoldering tip ESD-compliant
for SA 21 A
dpvlink
13838

4,80 EUR
The image shows a gray wooden block in a rectangular shape. It has a rough surface and is flat with rounded edges. The dimensions are approximately twice as long as they are wide.
Polishing stone
Grinding stone to remove thick
oxide layers from soldering tips
Cleaning possible only in cold condition of the
soldering tip
dpvlink
13825

14,85 EUR
The image shows a long, narrow wooden stick with a sharp, pointed edge. The surface is smooth and dark brown to black. The stick appears robust and stable.
Soldering tool type 35622
Soldering tool 35622 / SP-3010
fiber glass nylon reinforced plastic
dpvlink
20227

3,76 EUR
It is a silver precision pen with a black tip. The logo "CK" and the inscription "precision" are visible on the metal surface. A button is also present.
ESD Desoldering pump 6103A
ESD desoldering pump, electrostatically
dissipative
(DIN EN 61340-5-1)
dpvlink
21606

22,40 EUR
The image shows two round brushes with a black plastic head and a dense, gray bristle field. They are designed for cleaning purposes and have a compact shape.
Metal brushes WATCBM
Metal brushes WATCBM
for tip cleaners WATC100M/WATC100F
PU = 2 pieces
dpvlink
28147

86,15 EUR